Carrier RTU OPEN 11-808-427-01 - Additional Functions

RTU Open 17
These terminals are available for use in place of the flying wire leads at Molex connectors J1 and J2.
Binary inputs are configurable and may be used for the following functions:
Input Default input function Additional functions
Compressor Safety
3
Fan Status
Filter Status
Remote Occupancy
Door Contact
Fire Shutdown
5
Fan Status
Filter Status
Remote Occupancy
Door Contact
Enthalpy Switch
8
Fan Status
Filter Status
Remote Occupancy
Door Contact
HumidiStat
9
Fan Status
Filter Status
Remote Occupancy
Door Contact
J11 Outputs