RS – Multi-Stage, I-280
Centrifugal Pump 280 – 16.03.EN
MANUFACTURER: CARVER PUMP COMPANY
2415 PARK AVE.
MUSCATINE, IOWA, USA 52761
PRODUCT DESCRIPTION: RS – Multi-Stage, Centrifugal Pump
PART NUMBER:
SERIAL NUMBER:
DATE MANUFACTURED:
APPLICABLE EUROPEAN DIRECTIVES:
Machinery: The designated product complies with the following basic requirements of Directive 2006/42/EC:
Appendix I, section 1.1.2, 1.1.3., 1.1.5., 1.3.1., 1.3.2., 1.3.3., 1.3.4., 1.3.7., 1.3.8., 1.4.1., 1.4.2.1.,
1.5.1., 1.5.8., 1.5.9., 1.5.13., 1.6.1., 1.6.4., 1.6.5., 1.7.
ATEX: 94/9/EC
APPLICABLE INTERNATIONAL STANDARDS:
Machinery: EN ISO 12100:2010 EN ISO 13732-1:2008
EN 626-1:2008 EN ISO 13857:2008
ATEX: EN 1127-1, EN 13463-1, EN 13463-5
NOTIFIED BODY
Det Norske Veritas, ATEX NB 0575 retains a copy of the Technical File
ATEX product marking: II 2 G c T2
The product described in this Declaration of Conformity complies with the Applicable European Directives and
relevant sections of the Applicable International Standards. The signature on this document authorizes the distinctive
European mark to be applied to the equipment described. A Technical Construction File is available for inspection by
designated bodies
Authorized Signature: Date:
Important safety information is contained in the installation, operation and service manuals; read and
understand this information prior to installing or using this equipment
This Document applies only to the equipment described above and is invalid if not reproduced in its entirety.
EC Declaration of Conformity
www.carverpump.com
Phone: 1-563-263-3410
Email: sales@carverpump.com
Kurt Doren
Quality/ ISO Manager
To Next Page
Loading...
