10
1.5 Power Outlet and Requirements
Power Source : AC 100~240V, 50/60Hz, 1.5A
Power consumption : Max 90W
CL3500
series’
s outlet is on bottom of scale.
The CL3500 series is designed to be used almost anywhere in the world! Like the many appliances
of today, the CL3500 series is designed with an automatically switching power supply. This allows
operation when connected to an AC source from 100V to 240V at 50/ 60Hz with 5% tolerance.
NOTE: Please make sure that the power lines used for the CL3500 series are dedicated lines with
No high- noise devices (such as compressors, motors, etc) running on it.
Also, make sure that the wiring to the electrical socket is correct.
If you are uncertain as to the state of your work’ electrical lines,
please contact a certified electrician.) Once you are sure as to the safety of the electrical
line, make sure to ONLY plug the scale into a 3- prong outlet. The third prong is a safety ground
and an electrician should properly wire this if it is not correct or if you are unsure. Failure to this CAN
result in electrical shock from use of this or any electronic scale.
3) Do not use any 3- prong to 2- prong adapters or break- off the third prong from the CLP power
cord. The third prong is necessary and must be properly connected.
4) If you have any problems or questions regarding this matter, make sure to contact the CAS
Service Department.
Power Outlet
Power Switch
To Next Page
Loading...
Need help?
General
