CAS CL3500 Series - F L a S H a L L C L E a R ( M E N U C O D

39
CAS ELECTRICS CO.,LTD
4.3 Memory Clear
(Calibration MENU -> 2. System Options -> 1. Clear Memory)
You can clear memory depends on options below.
4.3.1 Clear Report (Menu Code 8211)
(Calibration MENU -> 1. Calibration -> 8. Factory Setting -> 1. Clear Report)
You can clear all the sales report.
4.3.2 Clear All PLU (Menu Code 8212)
(Calibration MENU -> 1. Calibration -> 8. Factory Setting -> 2. Clear All PLU)
Clear all PLU data. This time discount data is will be cleared.
4.3.3 Clear All Table (Menu Code 8213)
(Calibration MENU -> 1. Calibration -> 8. Factory Setting -> 3. Clear All Table)
Clear all Table date(Except PLU/discount data).
4.3.4 Flash All Clear (Menu Code 8214)
(Calibration MENU -> 1. Calibration -> 8. Factory Setting -> 4. Flash All Clear)
NOTE: After clearing all the memory. You must install primary data.
Except the program data all the item and font data will clear at once.
CLEAR MEMORY
(
2
/
2
)
4. Flash All Clear
8210 CAL ModE
CLEAR
MEMORY
(
1
/
2
)
1. Clear Report
2. Clear All PLU
3. Clear All Table