CAS EXP-2000A - Transmit Data Format

1
■ GW-BASIC Language
10 OPEN "COM1:9600,N,8,1" As #1
20 IF LOC(1) = 0 THEN 60
30 A$ = INPUT$(1,1)
40 PRINT A$ ; " ";
50 GOTO 20
60 B$=INKEY$ : IF B$ ="" THEN 20
70 PRINT B$ ; " ";
80 PRINT #1,B$;
90 GOTO 20
10. Tramsmit Data Format
(1) Baud rate : 2400 bps - 19200 bps
Choose Baud rate in SET mode(F07).
Refer to SET mode.
(2) Data bit: 8 , Stop bit: 1 , Parity bit: None
(3) Code : ASCII
(4) When data is sent to computer ?
Set in SET mode(F08).
(5) Data Format
5