■ Digital Part
Span calibration
Full Digital Calibration : SPAC
TM
(Single pass automatic span calibration)
Display LED (6 digit)
Size of letter 14 mm (Height)
Division ×1, ×2, ×5
Display below zero “-” minus signal
Permitted limit tare Full capacity
“STABLE” ▄ LAMP Weight is stable
“NET” ▄ LAMP ON (net weight), OFF (gross weight)
“TARE” ▄ LAMP tare is used
“ZERO” ▄ LAMP “0” kg
■ General Specification
Power
AC 220V, 50/60 Hz
Optional : AC 110V, 50/60 Hz
Size 180(W) x 228(D) x 157(H)
Temperature -10 ℃ ~ +40℃
Weight/Internal Cubic Volume
Approx. 7.4 kg / 2500 ㎤
Current Approx. 0.1 A
To Next Page
Loading...
