CAS LP-II - Display Column Assembly

2 Network Management
9
2.2 Network Copy
Once at the NET : NETWORK MANAGEMENT menu screen, press the 2 key. You will then see the
Network Copy screen as follows:
This copy function is to copy data
files from one scale to another on
a network. This allows you to
quickly reprogram a new scale, a
replacement scale, or simply
update an outdated program file.
All files are copied from the master
to a specified scale.
To copy All data, press the 1 key
from the NET: COPY DATA screen.
The display will change to the
STR: COPY ALL DATA screen: Press
ESC key to exit COPY DATA.
< NET : COPY DATA >
1. All (Cloning)
2. PLU Data
3. Global Data
4. Speed Key
5. Label format
NUMERIC
< STR: COPY ALL DATA >
To Scale Number: [ 3] (0=ALL)