3 Clerks
15
3.2 Networked Standard Clerk Option
When using Standard clerk mode, make sure that the SAVE, AUTO, VOID and PRE-PACK are off. Also,
make sure that you have not begun an ADD-UP transaction. Generating a floating clerk transaction is
the same as any sales mode transaction; To total a receipt you simply press the ST/TL key and select
your clerk number when requested.
3.3 Non-Networked Floating Clerk Option
When using floating clerk in Non-Network mode, the scale works in the same manner as mentioned
above except that you can only do transactions on one scale. Because the network is disabled for
clerk transactions, any sales transactions that you make in one scale will not be contained at any other
scale. The only advantage to using the scale in this mode, is that you can share one scale with
multiple clerks simultaneously and not have to worry about mixing-up different customer’s sales
transactions. This is true so long as the clerks use their own clerk numbers and NO ONE ELSES!
3.4 VOID Key in Floating Clerk Mode
From the Sales Mode screen, press the VOID key. You will input level 2 -password and get the following
screen:
Select your clerk number and press
the PRINT key.
After selecting your clerk number, you will see the following screen:
Selecting NO will return you to the
Sales Mode screen or list another
page of items if there are any.
Any items listed as number 0 are
previously VOIDed items.
However, after selecting your clerk number, item that be sold recently is voided in 7-segment VFD
version. You will see the following screen.
< VOID Floating Transaction >
Clerk Number (1~99) [ 1]
No: PLU Dept Wgt/Pcs Price Scl
1: 1 1 1.000 1.23 1
2: 1 1 1.000 4.56 1
3: 1 1 1.000 7.89 1
<< Total : 3 items $13.68 >>
Selection : Void/More (Y/N)?
To Next Page
Loading...
