3 Clerks
14
3 Clerks
3.1 Networked Floating Clerk Option
When using floating clerk mode, make sure that the SAVE, AUTO, and PRE-PACK are off. Also, make
sure that you have not begun an ADD-UP transaction. Generating a floating clerk transaction is the
same as any sales mode transaction except that you do NOT press the PRINT key; instead you must
press one of the Clerk-Speed keys (1 through 4) or press the CLERK key and enter your password. To
total a receipt you simply press the ST/TL key and select your clerk number when requested.
For example, press the MISC By-Weight PLU key, place an item on the platter, enter a price, and then
press the CLERK 1 key. The scale will not generate a label. Go to another scale and do the same
thing. Next, go to a third scale and do the same thing. Finally, while at the third scale, press the ST/TL
key. You will see the following screen:
At this point, select clerk number 1
as this is the clerk under which you
made the 3 transactions. If there
were other clerks on the network
making floating transactions, they
could be totaled from here also.
So be very careful in selecting
YOUR clerk number ONLY!
After selecting clerk 1, press the PRINT key. A screen will be displayed that shows you the status of your
transactions as follows:
If you select YES, then a detailed
receipt will be printed and Clerk 1
transactions for the current
customer will be cleared.
If you select NO, then you can
continue to make floating sales
transactions for that customer.
< Clerk Total of A Sale >
Clerk Number (1~99) [ 1]
SubTotal of this floating sale
:<Clerk 1 ADD> 3 ITEMS, $13.68
Print total report of this sale ?(Y/N)
To Next Page
Loading...
