2 Network Management
12
2.4 Lock Network
Once at the NET: NETWORK MANAGEMENT menu screen, press the 4 key. The scale will place the LOCK
command on the network queue and wait for you to return to <REG> mode. To return to <REG>
mode, press ESC until you get to <REG> mode. All the scales on the network will look as follows:
Any slave that is not in a sale mode will remain unlocked until the
user ESCAPES into a sale mode in which case the LOCK command
will take effect.
NETWORK LOCK
The master will not display this
message. Also, only scale in
sales mode (REG, MGR, or RPK)
will show this message. Even if
you turn the scale OFF and ON,
or if you unplug it and plug it
from the AC power and/or the
network, the scale WILL remain
in the LOCK mode. The only
way to come out of a LOCK
condition is to issue an UNLOCK
command from the master
scale.
To Next Page
Loading...
