CAS WEIGHING SOLUTION NT-200 Series - System Mode Configuration; System Mode Operations Overview

1
7
9. System Mode
 How to Go to System Mode
If you press the [ZERO] key for 2~3 seconds in weighing mode.
you can see the “SyS” on the display after showing “on”. And then
you can move to any mode where you want to go using the G/N key.
SYSTEM MODE
MODE [G/N] key DISPLAY [ENTER] key ACTION
Weight MODE ( )Ⅰ ↓ WEiGht END Weighing Mode
Count MODE ( )Ⅱ ↓ CoUnt END Count Mode
Percent MODE ( )Ⅲ ↓ PEr END Percent Mode
Accumulation
MODE ( )Ⅳ
↓
Circulation
Key
ACC END
Accumulation
Mode
ENTER WEiGht END Weighing Mode
WEIGHT MODE( )Ⅰ
INITIAL DISPLAY DESCRIPTION
Weighing Mode