0. Precaution
Observe the following safety precautions:
Do not disassemble the indicator.
Indicator must be grounded to minimize electricity static.
This will minimize defect or electric shock.
Do not pull the plug by its cord when unplugging. Damaged cord could cause
electric shock or fire.
Do not place or use the indicator near flammable or corrosive gas.
To reduce electric shock or incorrect reading, do not spill water on the scale or
place it in humid condition.
Avoid placing the indicator near heater or direct sunlight.
Insert plug firmly to wall outlet to prevent electric shock.
For consistent and accurate reading, maintain periodical check by your CAS
authorized dealer.
Avoid sudden shock to the indicator. Internal mechanism could be damaged.
Place the indicator on firm and temperature consistent environment.
Keep the indicator away from other electromagnetic generating devices.
This may interfere with accurate reading.
Our Dealers: CAS feels that each of its valued customers should get the best service
available. Whether it’s the initial installation of our product, maintenance/
repair work, or simply answering questions about our products, CAS Corporation and
all of it’s Authorized Dealers are highly trained to assist you with any need regarding
CAS products.
To Next Page
Loading...
