6
2. Features & Main Function
Features
( Appropriate for Weight and Measurement System
( Easy Operation
( Full Digital Calibration
( Weight Back-Up [ Weight Memory at Sudden Power Failure ]
( 4 Multi-Point Calibration
( Command Mode Function (Control by PC – Request and Set the Data)
( Kg/lb Conversion & kg/lb Calibration
( Lock Function of Front Key
( User Message Print Function
( Output the signal of Hi & Low limit, Zero, OK with serial comm.
( Count, Limit, Accumulation and Percent Function
( Set Point ( 20 of tare ), (Hi-limit, Low-limit, Count unit each )
( Preset Tare
( Gravity Compensation
Main Function
( ( Various Printer Connection [ Roll DEP & Label DLP Printer Support ]
( ( Users can Set the Desirous Max. weight and a Division Freely
( ( Independent Zero Calibration
( ( Self Hard Ware Test
* State Mark
- Only LED Version [ NT-200A / NT-200S ]
- Only LCD Version [ NT-201A / NT-201S ]
Nothing – Common Function
To Next Page
Loading...
