22
10. Calibration Mode
(zero span)
Zero and Span points to interpolate weight from Load Cell
Multi-point
Multi-point
mV/V
Real curve
weight
(full span)
Multi-point
Ideal
Multi-point
Multi-point
■ How to Go to Calibration Mode
Unfasten a Cal Switch Bolt on the rear side of indicator and then turn on
power while pressing CAL switch. The display show “rEAdY” “CALMOd”
■ Explain the Mode
rEAdY
C A L M o d
KIND Weight Calibration Gravity Sealing Mode
Zero
Calibration
ZERO KEY G/N Key Long G/N KEY PRINT KEY
Engineer Mode Exit Mode
Moving
KEY
PRINT Key Long UNIT KEY
To Next Page
Loading...
