CAS WEIGHING SOLUTION NT-200 Series - Page 40

41
SELECT the FORMAT of DATE
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 0 ~ 2 0 Do not print the date
1 Always print the date
ENTER
Save &
Go to d12
d11
2
Only print one time after Total
printing or product ID is changed
UNIT Save & Exit Save & go to Normal Mode
SELECT the FORMAT of PRODUCT ID
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 0 ~ 1 0 Do not print the Product ID
ENTER
Save &
Go to d13
d12
1 Always print the Product ID
UNIT Save & Exit Save & go to Normal Mode
SELECT the FORMAT of USER’S Message Print
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 0 ~ 1 0 Do not print the user’s message
ENTER
Save &
Go to d14
d13
1 Print the user’s message
UNIT Save & Exit Save & go to Normal Mode
Note 1. How to input the format of user’s message print is explained chapter 14
CAS & Command Mode Protocol in detail.