Case WX185 - Page 153

SECTION 3
3-42
NOTE: by pressing “ALL STANDARD VALUES”, all
devices will set to DEFAULT value. In such a case
the word “STANDARD” will be shown under the
device name.
In operating mode depress repeatedly the arrow
button, until on main menu appears “MACHINE”
inside of a frame. Confirm with “set” button.
Depress the arrow buttons repeatedly until the bar
is on “DAMPING”. Confirm with “set” button.
The arrows on the right side of display indicate that
other sub-menus can be recalled.
By depressing the button with the upward arrow (⇑),
you scroll to main menu.
Confirming with “set” button, the sub-menu “DAMP-
ING” is recalled.
By depressing the buttons with the upward arrow
(⇑) or downward arrow (⇓), you can select following
machine assemblies “set”:
-BOOM
- DIPPER
- BUCKET
-TRAVEL
The selected assy is now confirmed with button
“set”.
By depressing the buttons with the upward arrow,
you can set for each machine assy four different
damping adjustments, spacing from soft damping to
firm damping. Both have to be confirmed with button
“set”. If the selected assy is set or the standard
value is set, under the assy reference appears for
instance BOOM, the word “STANDARD”. If a differ-
ent setting from the standard value is defined, the
word “STANDARD” does not appear.
Confirming with “set” button, the main menu
“MACHINE” is recalled. First of all you are though
asked to memorize the settings. By depressing the
button with the upward arrow (⇑), the setting is NOT
saved. By pressing button “set”, the setting is mem-
orized and the modifications becomes active.
In the sub-menu “TRAVEL” the action of the travel
control piston is damped. According to this setting,
and with the pedal a soft or firm travel operation of
the machine is started.
F34132
MACHINE
Save changes
STANDARD
PARAMETERS NOT UPDATED.
RE-TEST.
PRESS ANY KEY
DAMPING
AUTO POWER BOOST
LEVELLING
SOFT
SOFT
SOFT
TRAVEL TRAVEL TRAVEL
TRAVEL
DAMPING DAMPING
BOOM
BUCKET
ALL STANDARD VALUES
DIPPER
SWING POWER
STRONG
STANDARD
STRONG
STANDARD
STRONG
62