Case WX185 - Page 352

DATA AND TECHNICAL SPECIFICATIONS
8-11
OUTFIT WITH OFF-SET BOOM
Dipper mm in 2000 78.74 2300 90.55 2600 102.36
A Maximum digging height mm in 8300 326.77 8300 326.77 8400 330.71
B Maximum loading height mm in 6000 236.22 6000 236.22 6200 244.09
C Maximum digging depth mm in 4700 185.04 5000 196.85 5300 208.66
C' Maximum off-set boom depth mm in 1400 55.11 1700 66.92 2000 78.73
D Maximum vertical wall digging depth mm in 2200 86.61 2000 78.73 2300 90.55
E
Maximum digging depth of cut for level
bottom (L = 2438 mm (95.98 in))
mm in 4400 173.22 4700 185.03 5000 196.85
F Maximum digging reach mm in 8100 318.89 8300 326.77 8600 338.58
G Maximum digging reach at ground mm in 7900 311.02 8100 318.90 8400 330.71
H Minimum swing radius mm in 2900 114.17 2900 114.17 2900 114.17
K
Maximum loading height (dipper
retracted)
mm in 2900 114.17 2600 102.36 2300 90.55
Or Off-set right side mm in 2600 102.36 2600 102.36 2600 102.36
Ol Off-set left side mm in 2400 94.49 2400 94.49 2400 94.49
Xr Off-set angle right side ° 42 42 42
Xl Off-set angle left side ° 43 43 43
F
1
Bucket tensile force (370 bar (5366 psi))
kN lbf 95.2 21402.9 95.2 21402.9 95.2 21402.9
F
2
Dipper tensile force (370 bar (5366 psi))
kN lbf 68.2 15332.7 62.4 14028.7 62.4 14028.7
17