3-13
I Performing Scientific Function Calculations Using a List
Lists can be used just as numeric values are in scientific function calculations. When the
calculation produces a list as a result, the list is stored in ListAns Memory.
Example To use List 3
41
65
22
to perform sin (List 3)
Use radians as the angle unit.
Q*(LIST)(List)BU
4. Switching Between List Files
You can store up to 26 lists (List 1 to List 26) in each file (File 1 to File 6). A simple operation
lets you switch between list files.
S To switch between list files
1. From the Main Menu, enter the STAT mode.
Press K(SET UP) to display the STAT mode Setup screen.
2. Use A to highlight “List File”.
3. Press (FILE) and then input the number of the list file you want to use.
Example To select File 3
(FILE)B
U
All subsequent list operations are applied to the lists contained in the file you select (List File 3
in the above example).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
