106
Connecting to devices
Connecting to devicesConnecting to devices
Connecting to a Headset
You can connect a compatible headset device equipped with a
standard 3.5mm plug to your phone for safe, convenient, hands-free
conversations.
1. To open the Headset Jack cover, insert your
fingertip into the notch and open the cover.
2. Plug the connector into the Headset
Jack.
Warning!
Do not forcibly insert/remove the connector into/from the Headset •
Jack. Insert/remove it carefully.
Failure to completely reseal the Headset Jack cover after use •
may lead to water or other liquids entering the casing, which may
cause damage to the phone.
You cannot insert the headset plug all the way in, depending on •
its plug grip thickness. In that case, use a plug with thinner plug
grip or an extension cable with such a plug.
If you insert the headset with the microphone (4-pole type) which •
has an IC controller, no sound is output from the headset.
To Next Page
Loading...
