99
Connecting to networks
Configuring system select
You can set your phone to search or roam for another network when
you are not in your home area.
Leave this setting as default unless you want to alter the system
selection as instructed by your service provider.
1. On the Home screen, touch the Menu key M > Settings >
Wireless & networks > Mobile networks > System select.
2. Touch one of the following:
Home Only: Only within your home area or home affiliated area.
Automatic: Scan radio channels based on the Automatic setting.
Connecting to Wi-Fi networks
You can transmit data at a faster speed when you connect to a Wi-Fi
network “hotspot” or wireless access point.
Some access points are open and you can simply connect to them.
Others are hidden or implement other security features, so you must
configure your phone to connect to such access points.
The following Status bar icons indicate your Wi-Fi status.
Connected to a Wi-Fi network (Waves indicate
connection strength)
Notification that an open Wi-Fi network is in range
NOTE
You can extend your battery life by turning off the Wi-Fi when you
are not using it.
To Next Page
Loading...
Need help?
General
