Recording Performances
EN-119
1.
Touch the a button.
The SONG mode screen appears.
• If any songs have been recorded (or played) since the Digital Piano was turned on, the last song
recorded (or played) will be played. To stop playback, touch the a button.
• The SONG mode screen allows playback of MIDI data and audio data in various formats as well
as audio recorder songs. For more information, see “Listening to Songs (SONG Mode)” (page
EN-100).
2.
If the Digital Piano is in MIDI Mode, change to Audio Mode.
• When “Part” or “Tempo” is displayed on the SONG mode screen, the Digital Piano is in MIDI
Mode. Use the following operation to change to Audio Mode.
(1) Touch the F4 (STYPE) button.
(2) Trace the touch ring to change the “Song Type” setting to “Audio(USB Drv)” (to play a song
from the USB flash drive) or “Audio(Internal)” (to playback songs from the internal memory).
(3) Touch the EXIT button to return to the SONG mode screen.
3.
Trace the touch ring to select the audio recorder song you want to play.
4.
To start playback, touch the a button.
• During playback, the following operations are available.
Touch the F1 button (s): Backs up the song a little.
Touch and hold the F1 button (s): While held down, the song will rewind.
Touch the F2 button (k): Pauses the currently playing song. Touch while paused to resume
playback.
Touch the F3 button (d): Advances the song a little.
Touch and hold the F3 button (d): While held down, the song will fast-forward.
• When the song reaches the end, playback will stop. Touch the a button to stop midway.
Playing Back a Song from the Audio Recorder
To Next Page
Loading...
Need help?
General
