Casio Privia PX-S7000

Changing the Sound During a Performance
EN-63
Use the EXPRESSION/ASSIGNABLE jack to connect a commercially available expression pedal or
a separately available sustain pedal.
■ Connectable Expression Pedals
• Maximum resistance value: 10kΩ±20% to 50kΩ±20%
• Use of a pedal whose operation has been confirmed (see below) is recommended.
Operation Confirmed Pedals (Polarity Type 2
*
)
Roland EV-5 (Set minimum volume to 0.)
KURZWEIL CC-1
FATAR VP-25, VP-26
* Use the procedure under “To specify the pedal type” (page EN-63) to select “Exp.Type2”.
■ To specify the pedal type
1. Select the “13 KB Setting” of the F button set. See “To change the F Button Set”
(page EN-32).
2. Touch the F3 button (PEDAL).
The “EXP/ASGN. PEDAL” screen appears.
• Confirm that the cursor ( ) is on “Pedal Type”.
3. Use the touch ring to change the desired setting.
• The polarity of expression pedals varies by manufacturer. When connecting an expression
pedal, select “Exp.Type1” or “Exp.Type2” according to the polarity of the pedal.
EXPRESSION/ASSIGNABLE jack
Setting value Description
Exp.Type1
Polarity Type 1 (see the illustration below) expression pedal
Exp.Type2
Polarity Type 2 (see the illustration below) expression pedal
SW Separately available sustain pedal