Saving and Recalling Performance Setups (Registration)
EN-83
By turning on the Freeze function, you can prevent certain setting items from being changed when the
registration is recalled. Use the following procedure to select which setting item to freeze.
■ To select freeze items
1.
Select “02 Regist Setting” as the F Button Set. See “To change the F Button Set”
(page EN-32).
2.
Touch and hold the F3 button (FREEZ).
The “FREEZE” screen appears.
3.
Touch the top or bottom of the touch ring to select the setting item you want to
change.
• For details on the setting items, see “Registration Memory Data” (page EN-86).
4.
Switch the setting value of the selected item between “On” (freeze) and “Off” (do
not freeze).
5.
Repeat Steps 3 and 4 as necessary.
■ To enable or disable freeze
1.
Select the “02 Regist Setting” of the F Button Set. See “To change the F Button
Set” (page EN-32).
2.
Touch the F3 button (FREEZ).
The Freeze function is turned on, and appears on the display.
3.
To turn off the Freeze function, touch the F3 button (FREEZ) so is not
displayed.
Freeze Function
Appears when Freeze is on
To Next Page
Loading...
