USB Flash Drive
EN-138
3.
Touch the top or bottom of the touch ring to select the type of data to save, then
touch the ENTER button.
• If you choose “ALL”, after touching the ENTER button the file name edit screen will be
displayed so proceed to Step 5. Otherwise, the screen for selecting the type of data to save will
be displayed so proceed to Step 4.
4.
Perform the following actions depending on the type of data you selected.
■ If you selected “MIDI REC SONG”:
(1) Touch the top or bottom of the touch ring to select the data to save, then touch the ENTER
button.
A screen appears for selecting the file format (MRF or MID) to save the data in.
(2) Touch the top or bottom of the touch ring to select “MRF” (dedicated format for this Digital
Piano) or “MID” (SMF format), then touch the ENTER button.
The file name editing screen appears.
■ If you selected “AUDIO REC SONG” or “REGIST BANK”:
(1) Touch the top or bottom of the touch ring to select the data to save, then touch the ENTER
button.
The file name editing screen appears.
5.
Rename the file if necessary.
• For details, see “To change a character” (page EN-35), “To insert a character” (page EN-36),
and “To delete a character” (page EN-36).
6.
To confirm the file name, touch the ENTER button.
“Sure?” or “Replace?” appears in the screen confirming whether you want to save the file.
“Sure?” .............. Appears when there are no files with the same name on the destination USB
flash drive.
“Replace?”......... Confirms whether you want to overwrite an existing file with the same name on
the destination USB flash drive.
• To exit the operation without saving, touch the left of the touch ring (NO).
7.
To save, touch the right of the touch ring (YES).
“Wait...” is displayed during the save process. Do not perform any action on the Digital Piano while
this is happening. When saving is complete, “Complete” appears.
• It may take several minutes to save audio recorder songs or all user data, depending on the size
of the data.
To Next Page
Loading...
Need help?
General
