Operations Common to All Modes
EN-34
(2) Trace the touch ring to move the cursor ( ) to “KBD SETTING”, and then touch the ENTER
button.
(3) Move the cursor ( ) to “Hammer Response” by touching the top or bottom of the touch ring.
(This time, it is not necessary to touch the ENTER button.)
3.
Change the value.
• Touch the left or right or trace along the touch ring.
• You can also touch the ENTER button to display the value list screen and change the value
there.
• While touching and holding the FUNCTION button, touching the top, bottom, left, or right of the
touch ring will return it to the initial default value.
• In the FUNCTION menu, each touch of the EXIT button moves one level up from the currently
displayed level. Touch and hold the EXIT button to return to the top screen from any level.
• For details on all FUNCTION menu items, see “FUNCTION Menu Items” (page EN-169).
To Next Page
Loading...
