Changing the Sound During a Performance
EN-70
4.
If “Control Assign” is set to “Modulation”, change the modulation settings as
necessary.
• Touch the top or bottom of the touch ring to set each item, such as “Mod Value”. For more
information, see “To change the Modulation settings” (page EN-71).
• The “CONTROL” screen can also be displayed by pressing the CONTROL button while touching
the FUNCTION button instead of steps 1 and 2 above.
• For the portamento time setting when “Control Assign” is set to “Portamento”, see “Specifying the
Portamento Time” (page EN-71).
To Next Page
Loading...
