Casio TE-2200 Service Manual

— 35 —
[ 6 ] CF-CARD READ ONLY test
[Function]
This test will check the read only test for CF-CARD.
Perform the CF-CARD write test, before start of this test.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : 0 n 1 1 3 SUBTOTAL
n : 0 = One time check(can be omitted)
not 0 = Continuous check( To stop the test, press ”C” key or turn off the power by rotating
the key.)
[PRINT]
NG and the address are printed if READ cannot be done
normally.
CF - CARD 113
CF RD OK
END 11 3
[ 7 ] CF-CARD CLEAR test
[Function]
This test will check the clear test for CF-CARD.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : 0 n 2 1 3 SUBTOTAL
n : 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press “C” key or turn off the power by rotating
the key.)
[PRINT]
NG and the address are printed if WRITE cannot be done
normally.
CF - CARD 213
CF CLR OK
END 21 3

Casio TE-2200 Specifications

General

Types of payment	Cash
Supported paper width	58 mm
Display digits	10 digits
Second display	Yes
Second display type	LED
Display number of characters	16
Power source	AC
AC input voltage	120-230 V
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	450 mm
Width	400 mm
Height	277 mm
Weight	12000 g