Casio TE-2200 Service Manual

— 4 —
RECEIPT
FEED
RECEIPT JOURNAL
FEED FEED
REG2X1
REG1Z1
OFF X2/Z2
RF
PGM
Machine initialization procedure
1. Plug the power cord into an AC outlet.
D
11
D
10
D
9
D
8
~ D
3
D
2
D
1
refer to Worksheet (Initialize)
2. MACHINE INTIALIZATION
2. Hold down <JOURNAL FEED>.
3. Turn the mode switch to PGM position.
4. Release <JOURNAL FEED>.
You should see “0000000000” on the display.
If 10 zeros are not shown or another character are
shown, immediately set the mode switch to OFF and
restart from the beginning of this procedure.
5. Enter 11-digit program code from the worksheet.
6. Press <SUBTOTAL> to register the program code.
(Wait until beep twice.)
7. Press <SUBTOTAL> to register the program code.

Casio TE-2200 Specifications

General

Types of payment	Cash
Supported paper width	58 mm
Display digits	10 digits
Second display	Yes
Second display type	LED
Display number of characters	16
Power source	AC
AC input voltage	120-230 V
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	450 mm
Width	400 mm
Height	277 mm
Weight	12000 g