EasyManuals Logo

Casio XJ-V100W User Manual

Casio XJ-V100W
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
To adjust image brightness (FUNC)
1.
Press the [FUNC] key. On the menu that appears, select “Brightness” and then
press the [ENTER] key.
2.
On the brightness adjustment screen that appears, use the [] and [] keys to
adjust brightness.
3.
To hide the window, press the [ESC] key.
Note
The above operation is for fine adjusting image brightness without affecting light brightness.
For information about changing light brightness, see “Light Control” (page 21).
To change the color mode (FUNC)
1.
Press the [FUNC] key. On the menu that appears, select “Color Mode” and then
press the [ENTER] key.
This displays the color mode selection window. The currently selected color mode is the one
whose button is selected (filled in).
2.
Use the [] and [] keys to move the highlighting to the color mode you want to
select, and then press the [ENTER] key.
This will select the button next to the highlighted color mode name.
For details on what each color mode does, see “Image Adjustment 1 3 Color Mode” (page
27).
3.
To hide the window, press the [ESC] key.
Important!
The color mode cannot be selected in the following cases.
When “Off” is selected for the “Light Control” setting (page 21)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio XJ-V100W and is the answer not in the manual?

Casio XJ-V100W Specifications

General IconGeneral
Matrix size0.65 \
Native aspect ratio16:10
Projection distance- m
Projection technologyDLP
Contrast ratio (typical)20000:1
Screen size compatibility35 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-30 -30 °
Offset33 %
Throw ratio1.32 - 1.93:1
Zoom capabilityYes
Focal length range18.9 - 27.2 mm
Aperture range (F-F)2.31 - 2.73
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Maximum analog resolution1920 x 1200 pixels
USB 2.0 ports quantity0
Password protection typePower on
Card reader integrated-
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.12 W
Power consumption (typical)135 W
Remote control typeIR
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Width299 mm
Height97 mm
Weight3500 g

Related product manuals