Casio XJ-V100W User Manual

33
To change the password
1. Press the [MENU] key to display the setup menu.
2. Use the [] key to select “Option Settings 1”, and then press the [ENTER] key.
3. Use the [] key to select “Password”, and then press the [ENTER] key.
 This will display a dialog box prompting you to enter the current password.
4. Enter the current password.
 The password of your projector is not really a “word” made up of letters, but rather a
sequence of remote controller key inputs.
 If the projector is still protected by the factory default password, perform the key operation
shown below to enter it.
5. After entering the current password, press the [ENTER] key.
 This displays the Password screen.
6. Use the [] key to select “Change Password”, and then press the [ENTER] key.
 This will display a dialog box prompting you to enter the new password.
7. Enter a key sequence up to eight key operations long.
 You can use any of the following keys as part of your password key sequence.
[INPUT], [MENU], [BLANK], [FREEZE], [ ], [VOLUME +], [VOLUME –], [D-ZOOM +],
[D-ZOOM –], [KEYSTONE +], [KEYSTONE –], [], [], [], [], [TIMER], [AUTO], [ASPECT],
[FUNC]
8. After entering the new password, press the [ENTER] key.
 This will display a dialog box prompting you to enter the same password again.
9. Re-enter the same password key sequence you entered in step 7 and then press
the [ENTER] key.
 The message “Your new password has been registered.” indicates that the password has
been changed. Press the [ESC] key.
 If the password you entered in this step is different from the one you entered in step 7, the
message “The password you input is wrong.” appears. Press the [ESC] key to return to step 7.
[] [] [] [] [] [] [] []

Casio XJ-V100W Specifications

General

Matrix size	0.65 \
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	35 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-30 -30 °
Offset	33 %
Throw ratio	1.32 - 1.93:1
Zoom capability	Yes
Focal length range	18.9 - 27.2 mm
Aperture range (F-F)	2.31 - 2.73
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Cable lock slot type	Kensington
Maximum analog resolution	1920 x 1200 pixels
USB 2.0 ports quantity	0
Password protection type	Power on
Card reader integrated	-
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.12 W
Power consumption (typical)	135 W
Remote control type	IR
Harmonized System (HS) code	85286200

Weight and Dimensions

Width	299 mm
Height	97 mm
Weight	3500 g