EasyManuals Logo

Casio XJ-V100W User Manual

Casio XJ-V100W
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
42
To connect a digital camera to the projector
1.
If necessary, configure the digital camera’s USB mass storage class setting.
2.
Turn off the digital camera and connect a USB cable to it.
3.
Connect the other end of the USB cable (Type A connector) to the Data
Projector’s USB-A port.
4.
Turn on the digital camera.
Note
For details about steps 1, 2, and 4, see the user documentation that comes with your digital
camera.
To start projection of files that are on a memory device
connected via USB
1.
Connect the memory device where files you want to project are stored to the
projector’s USB-A port.
If the File Viewer main screen appears automatically, advance to step 4 of this procedure. If it
doesn’t, go to step 2. Note that the File Viewer main screen will appear automatically if “On” is
selected for the “Plug and Play” setting on the projector’s Setup Menu.
2.
Press the [INPUT] key. This will display the “Input” dialog box.
3.
Use the [] and [] keys to select “File Viewer” and then press the [ENTER] key.
This will start up File Viewer and display the File Viewer main screen.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio XJ-V100W and is the answer not in the manual?

Casio XJ-V100W Specifications

General IconGeneral
Matrix size0.65 \
Native aspect ratio16:10
Projection distance- m
Projection technologyDLP
Contrast ratio (typical)20000:1
Screen size compatibility35 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-30 -30 °
Offset33 %
Throw ratio1.32 - 1.93:1
Zoom capabilityYes
Focal length range18.9 - 27.2 mm
Aperture range (F-F)2.31 - 2.73
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Maximum analog resolution1920 x 1200 pixels
USB 2.0 ports quantity0
Password protection typePower on
Card reader integrated-
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.12 W
Power consumption (typical)135 W
Remote control typeIR
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Width299 mm
Height97 mm
Weight3500 g

Related product manuals