Casio XJ-V100W User Manual

43
4. Depending on the type of file you want to project, perform one of the operations
below.
 The screen that will appear depends on the function you selected.
5. Use the file list displayed on the screen to check the contents of the USB flash
drive you connected in step 1 of this procedure or the contents of internal
memory.
 If the file list shows the contents of a USB flash drive, go to step 7 of this procedure. If the file
list shows the contents of internal memory, go to step 6.
6. Press the [FUNC] key. On the menu that appears, select “Drive Switching” and
then press the [ENTER] key.
7. Depending on the function you selected in step 4 of this procedure, perform one
of the operations below.
To project this type of file: Perform this operation:
Presentation File Use the [] and [] keys to select “Presentation” and then press the [ENTER]
key.
PDF File Use the [] and [] keys to select “PDF Viewer” and then press the [ENTER]
key.
Image File Use the [] and [] keys to select “Slide” and then press the [ENTER] key.
Movie File Use the [] and [] keys to select “Movie” and then press the [ENTER] key.
If you selected this function: Perform this operation:
Presentation Perform the procedure from step 2 under “To project a presentation file”
(page 45).
PDF Viewer Perform the procedure from step 2 under “To project a PDF file” (page 46).
Slide Perform the procedure from step 2 under “To project an image file” (page
47).
Movie Perform the procedure from step 2 under “To project a movie file” (page 47).
Function name
Folder path

Casio XJ-V100W Specifications

General

Matrix size	0.65 \
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	35 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-30 -30 °
Offset	33 %
Throw ratio	1.32 - 1.93:1
Zoom capability	Yes
Focal length range	18.9 - 27.2 mm
Aperture range (F-F)	2.31 - 2.73
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Cable lock slot type	Kensington
Maximum analog resolution	1920 x 1200 pixels
USB 2.0 ports quantity	0
Password protection type	Power on
Card reader integrated	-
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.12 W
Power consumption (typical)	135 W
Remote control type	IR
Harmonized System (HS) code	85286200

Weight and Dimensions

Width	299 mm
Height	97 mm
Weight	3500 g