Casio XJ-V100W - To Check the Power Saving Level; To Turn the Light Sensor Control on or off (XJ-F Series Only)

22
To check the power saving level
1. Press the [ ] key.
 This displays a light control dialog box. The current power saving level is indicated by leaf ( )
marks at the top of the dialog box. The more leaf marks there are, the higher the power saving
level.
 At this time you can adjust the light output level using the [] and [] keys.
2. To close the dialog box, press the [ESC] key.
Note
 The above operation cannot be performed while “Off” is selected for the “Light Control”
setting on the Setup Menu.
To turn the light sensor control on or off (XJ-F Series only)
1. Press the [MENU] key to display the Setup Menu.
2. Use the [] key to select “Option Settings 1”, and then press the [ENTER] key.
3. Use the [] key to select “Light Control” and then press the [ENTER] key.
 This displays a light control dialog box.
4. Use the [] key to select “Light Sensor” and then press the [] key to select
“On” or the [] key to select “Off”.
5. Press the [ESC] key to exit the Setup Menu.