Casio XJ-V100W - Projecting Files from a Memory Device Connected by USB; To Connect a USB Flash Drive to the Projector; To Connect a Memory Card to the Projector

41
Use the procedures in this section when you want to use File Viewer to project image files, movie files,
presentation files, or PDF files from a USB flash drive or other memory device.
Supported Memory Devices
The Data Projector’s USB-A port supports connection of a FAT/FAT32 format memory device
supported by the USB interface. The following are supported memory devices.
 USB flash drive
 Memory cards
A commercially available USB card reader is required to connect a memory card to the Data
Projector.
 USB storage class (USB Mass Storage Class) compatible digital cameras
To connect a USB flash drive to the projector
Connect USB flash drive to the Data Projector’s USB-A port as shown below.
To connect a memory card to the projector
1. Load the memory card into a USB card reader’s card slot.
 For details about how to load a memory card into the USB card reader, see the user
documentation that comes with the reader.
2. Connect the USB card reader to the Data Projector’s USB-A port.
Projecting Files from a Memory Device Connected by USB