cectek Kingcobra - Fluid and Filter Management

97
ENGINE OIL AND FILTER CHANGE
The engine oil and lter must be changed according to the maintenance schedule. The engine
oil must be warmed-up before drain it out form the engine. Follow the below procedure to
change the oil and oil lter:
1. Park the vehicle on level ground.
2. Remove the dip stick.
3. Remove the drain plug from the bottom of the engine and drain the oil.
4. Turn the oil lter cap counterclockwise and remove the cap.
Drain plug
Oil lter cap
2
1
2
1
1
2