EasyManua.ls Logo

cectek Kingcobra - Vehicle Information and Identification; Vehicle Specifications

cectek Kingcobra
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
VEHICLE INFORMATION
VEHICLE SPECIFICATIONS
Overall length 2040mm 1985mm
Overall width 1250mm 1267mm
Overall height 1225mm 1108mm
Wheelbase 1320mm 1300mm
Ground clearance 314mm 137mm
Front track 1106mm
1115mm
Rear track 1066mm 1115mm
Seat height 900mm
756mm
Dry mass 332kg 331kg 324kg
Engine
Type 4 Stroke , SOHC , 4-valve
Number of cylinder single
Bore 90mm
Stroke 78mm
Displacement 496.2cm
3
Compression ratio 10
Fuel system Close-Loop Electronics Fuel Injection
Air cleaner Synthetic paper lter with foam
Starter system
Electric
Luberication system Wet sump
Drive Train
Clutch N / A
Transmission Automatic CVT With CECTEK Knob
Transfer V-belt
Gearshift pattern, Transmission
Transfer
Automatic
R-N-H-L (Hand operated)
Automatic transmission ratio Continuously variable change (1.581-0.316)
Transmission reduction ration, High
Low
Reverse
Secondary reduction ration
1.333 (36/27)
2.500 (45/18)
2.833 (34/12)
2.462 (32/13)
Final Differential ratio (Front & Rear) 3.6(36/10)
Chassis
Front suspension Independent Dual A-Arm,Forged Aluminum Upper Arm
Rear suspension Independent Dual A-Arm,Forged Aluminum Upper Arm
Caster -2° -7°
Toe-in 0~5 mm (One Side)
Camber
Front Wheel : -1° ~ -2°
Rear Wheel : 0° ~ -1°
Steering angle 15°
Front brake 200mm 250mm
Rear brake 188mm
Front tire size
AT 25x 8-12 195/45R15
KINGCOBRA ESTOC
Dimension and Dry Mass
ixd ix
Rear tire size
AT 25x10-12 205/55R15

Table of Contents

Related product manuals