cectek Kingcobra - Differential and Coolant Management

28
CAUTION
Contaminated oil may damage the engine.
If the oil level is over the level unexpectedly,
the oil may be contaminated by external
liquid.
Contact CECTEK authorized for inspection
and diagnostic.
NOTE:
Requiring frequently engine coolant solution relling could be the indication of leaks or
engine problem. Consult to the authorized CECTEK dealer for detail.
Front and Rear Differential Gear Oil
Use a SAE 80W-90 hypoid gear oil on API classication GL-5 to ll the front differential.
If the vehicle is operated under ambient temperature 0°C, use a SAE 80W-90 hypoid gear oil
on API classication GL-5.
Recommend oil type: PENNZOIL 4096 80W-90 GL-5
Front and Rear Differential Gear Oil Level
Put the vehicle on a level surface. Confirm the differential is cold. Check the oil levels as
bellows:
a. Turn the rell cap counterclockwise, remove it.
b. Fill the differential gear oil up to the rell port.
c. Install the rell cap clockwise to install.
Wipe off spilled oil and conrm there is no leakage from the cap.
Maximum differential gear oil capacity: 300 cc when drain out fully
Differential Oil Filling Port
1
2
Oil ll cap
Maximum oil level
1
2