EasyManua.ls Logo

cectek Kingcobra - B. Hazard Warning Switch; Override Button

cectek Kingcobra
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
Fog Light Position
When switching to this position the fog lights are illuminated.
Low Bean Headlight Position
When switching to this position the high and low beam headlights are illuminated.
High Beam Headlight Position
When switching to this position the high beam headlights are illuminated.
b. Hazard Warning Switch
Use the Hazard Warning Switch to illuminate all direction light for warn other vehicle when the
vehicle is stationary or temporarily block trafc.
Position
When switch to this position the hazard light is activated to warn other vehicles.
Position
Switch the hazard light off.
c. Direction Light Switch
Switch the button on the right or left side, depending on your turning direction. Press the switch
to deactivate the direction lights.
d. Horn Button
Press the horn button to warn other vehicle via sound.
e. Override Button
Pushing and holding the override switch can remove the power limit of engine in front
differential lock mode or reverse.
When the front differential lock and 4WD is activated, the power of engine output will be limited
by differential control computer for safety. For emergency in tough terrain, pressing the override
button and then pushing the throttle lever can remove the engine power limit for temporary
emergency use.

Table of Contents

Related product manuals