cectek Kingcobra - Troubleshooting Common Issues

111
The fuses are located under the seat. The specication and function of each fuse is marked
on the cover of box. You must install the fuse according to the specication marked on the box
cover. If you could not exactly conrm the specication of fuse, contact CECTEK dealers.
If the fuse is blown, turn off the main switch and install a new fuse that specied amperage.
Turn on the switch to check. If the fuse immediately blows again, contact with a CECTEK
dealer.
If the electrical system fails to operate, the fuses must be checked.
CAUTION
Using an improper fuse can damage your vehicle.
An improper fuse can cause damage to the electrical
system that could lead to a re.
Always use a fuse of the specied amperage.
LIGHT BULB REPLACEMENT
The wattage rating of each bulb as below chart. When replacing a burned-out bulb, use the
same wattage rating.
Headlight 12V V55W
Auxiliary Headlight 12V V55W
Brake Light 12V 21W
Taillight 12V 5W
Indicator Light 12V 10W
CAUTION
Replace the bulb with incorrect wattage rating
can damage your vehicle.
Incorrect wattage could result the electrical
system overload, or bulb may burn out
sooner.
Headlight module
HEADLIGHT
1
1