cectek Kingcobra - ThrottleCableAdjustment

95
Spark plug gap
SPARK PLUG GAP SPECIFICATION
0.6~0.7 mm (0.024~0028 in )
Use a thickness gauge to check the gap and adjust the gap to 0.7~0.8 mm (0.028~0.032 in).
1
Adjust the engine idling speed before adjusting the throttle lever free play
1. Losses the locknut.
2. Turn the adjusting bolt until the throttle lever free play of 3.0~5.0 mm (0.12~0.20 in).
3. Tighten the lock nut.
4. Recheck the throttle cable play. If it is not within the correct limits, readjust it.
THROTTLE CABLE ADJUSTMENT
1
1
2
Adjust nut
Throttle level play (3~5mm) (0.12~0.2 in)
2
1