CertoClav Vacuum Pro 45 - Sterilisation Settings; Customising Sterilisation Programs

To Next Page

To Previous Page

Instruction Manual CertoClav Vacuum Pro 45 l — Model STE-45-T

11.3 Sterilisation settings

11.3.1 Customising sterilisation programs

To customise a sterilisation program, navigate to the Settings Menu by clicking on the

 symbol at the top right of the screen. Press on “Sterilization” and then “Edit user

defined program”.

Now define the program parameters individually corresponds to your requirements:

• Number of prevacuum pumps between 1 and 10

• Sterilisation temperature between 105 °C and 134 °C

• Sterilisation time between 4 and 60 minutes

• Drying time between 1 and 25 minutes

Then press on “Apply” to save the program parameters or on “Cancel” to return to the

Settings Menu and cancel the process.

11.3.2 Material tests and automatic repetitions