Instruction Manual CertoClav Vacuum Pro 45 l — Model STE-45-T
13 Maintenance
Please use original spare parts of the manufacturer only. Please contact
your dealer if you have any questions regarding maintenance and repair.
Make sure that the autoclave is disconnected from the power supply
during maintenance and repair.
Make sure that autoclave is at room temperature.
The following components need to be checked or replaced regularly:
• Sealing ring
• Safety valve
Inspection plan:
Door
Trained
Every 2 years See service instructions
Sealing ring
Trained
Annually See service instructions
Fuse
Trained
personnel
If the fuse has
tripped.
Operate the fuse lever on the
rear of the autoclave.
Safety valve
Trained
personnel
Annually See service instructions
To Next Page
Loading...