CertoClav Vacuum Pro 45 - Page 5

Instruction Manual CertoClav Vacuum Pro 45 l — Model STE-45-T
5
11.3.3 CertoTrace — Your support during material tests 47
11.3.4 Label designer 47
11.3.5 Real-time protocolling to USB 48
11.3.6 Exporting all protocols to a USB 48
11.3.7 Exporting all protocols to an SD card 49
11.3.8 Exporting all protocols via a network 50
11.4 System settings 51
11.4.1 Changing the date and time 51
11.4.2 Installing updates via the Internet 51
11.4.3 Installing updates via USB 52
11.4.4 Installing updates via SD card 53
11.4.5 Restoring the default settings 53
11.4.6 Changing the language 54
11.5 Configuration of SMS and email notifications 54
11.6 Sensor calibration 55
11.7 GLP and GMP data 55
11.7.1 Header 55
11.7.2 Autoclave designation 55
11.7.3 Project designation 55
11.7.4 Advanced GLP and GMP settings 56
11.8 Locking settings 56
12 Error Messages 57
13 Maintenance 59
14 Transport and Storage 60
14.1 Preparations 60
14.2 Emptying the water containers 60
14.3 Transport conditions 60
14.4 Storage conditions 60
15 Technical Data 61
16 Appendix 62
16.1 Appendix 1: Structural diagram 62
16.2 Appendix 2: Circuit diagram 63
16.3 Appendix 3: CE Declaration of Conformity for Autoclave 63
16.4 Appendix 4: CE Declaration of Conformity for Safety Valve 65