chapter C
page 3
1,2 - 2,0 t A.C.
SERVICE MANUAL
Electric
036-0410-07
SAFETY INFORMATION
Work clothes
1 protective gloves
2 overalls
3 safety boots
4 protective goggles
Work place
The work place must be lighted and aired.
The area around the truck must be obstacles free
Oil signs or grease substances must not be presents on the pavement (danger of sliding).
Lifting the truck
Before doing any job, it is obligatory to lift the front wheels with blocks
to avoid the risk of accident.
1. Block the steered wheels with chocks (A).
2. Tilt the mast back and place blocks (B) under their base.
3. Tilt the mast forwards: the direction wheels must be lifted and
free to rotate
B
A
To carry out correctly all the lifting operation of the truck it is necessary to have the following tools:
. a hydraulic jack with up to 5 ton capacity
. metal or hard wood blocks
before putting the blocks under the must, check the inclination of the floor, the truck must be parked on a flat,
horizontal surface.
To Next Page
Loading...
