1,2 - 2,0 t A.C.
SERVICE MANUAL
Electric
036-0410-07
chapter 4000
page 10
1
2
5
3
BEARING ADJUSTMENT
Steering wheel bearings require an adjustment once a year.
Steering wheels
- lift the steering wheels
- remove cap (1);
- fasten the nut with a torque setting of 6 dNm;
- turn the hub of 2-3 turns in both senses;
- unfasten nut (3) and retighten with a 2-1 daNm torque;
- check that the wheels slide correctly (max. rolling final torque: 0.2 dNm) and that there is no side play
(maximum axial play of 0.05 mm);
- reassemble the cap (1);
- lower the wheels again and check that all bolts fixing the wheel disk (5) to hub (2) are well tightened.
To Next Page
Loading...
