© Cesab 8 – 5 T Code(s): 841, 842, 843
Repair manual: Troubleshooting Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
8.5 Error code history
Up to 50 of the most recent error code events can be stored in a log along
with the hour meter reading when the error occurred. The error code log
displays error codes in chronological order starting with the most recent error
code.
Do as follows to display the error code log:
1. Make sure that the truck is switched off. Connect the CAN key or enter
the PIN code. Note: Do not press the ON switch.
2. Press and then release the horn button. “Info“ is shown on the display.
3. Press and then release the horn button to select the "Info" menu.
4. Turn the speed control several times until “E” is shown on the display.
The error code symbol lights up.
5. Press and then release the horn button to select.
6. The most recent error is then displayed. The display alternates between
the error code and the hour counter reading when the error occurred. If
the error code log contains more than one error code, the codes can be
displayed by repeatedly pressing the speed control.
7. Switch off the truck by pressing the OFF switch or return to the previous
menu by selecting "ESC".
The display of error code history is now complete.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
