© Cesab 2 – 1 T Code(s): 841, 842, 843
Repair manual: General introduction Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
2. General introduction
2.1 How to use this manual
The repair manual is divided into chapters containing the following
information:
• General safety rules.
• Operation and connection sequences – This chapter provides a basic
description of the main functions of the truck and their interdependencies.
• Parameters – This chapter provides a basic description of the truck
parameters.
• Installation – This chapter describes the preparatory work that is to be
done before the truck is used for the first time.
• Maintenance – This chapter provides an overview of periodic
maintenance.
• Troubleshooting – This chapter describes the action you should take
when the truck is completely or partially malfunctioning. It also describes
the cause of the problem together with suggested remedies.
• C codes – This chapter describes the various truck systems, e.g. the
hydraulic system and includes descriptions of system parts and the
necessary service procedures. These descriptions are divided according
to Cesab's C code system.
• Instructions for disposal – This chapter specifies the proper sorting
categories for the materials used in the various truck components.
• Wiring diagram – This chapter provides information on electrical
components and wiring diagrams.
• Hydraulic diagram – This chapter provides information on hydraulic
components and hydraulic diagrams.
• Tools – This chapter provides a list of the special tools required.
• Service data and grease specifications – This chapter contains
information on general tightening torques and an oil and grease
specification.
• Technical data.
https://www.forkliftpdfmanuals.com/
To Next Page
