© Cesab 19 – 4 T Code(s): 841, 842, 843
Repair manual: Instructions for disposal Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
19.4 Sorting categories
• Plastic and rubber material
• Iron/steel (including bolts, washers and nuts)
• Oils
• Oil filters
• Oil-polluted material
• Electronic parts (including switches and sensors)
• Wires
• Hazardous waste
• Complex materials - large amounts in several categories but non-
combustible and not hazardous
• Combustible material, including small plastic and rubber parts
• Please return batteries to the manufacturer.
Component Category Comments
Chassis Iron/steel
Inspection covers, sheet metal
Iron/steel
Handle: >ABS<
Inspection covers, plastic Plastic
Sort according to the material
marking
Forks and frames Iron/steel
Operator's platforms
Iron/steel, including any gas struts
Mats, cushions: combustible
Be sure to depressurise struts
Roofs and overhead guards Iron/steel
Gates and operator protective
devices
Iron/steel
Plastic handles: >PA<
Crush protectors: >PMMA<
Hydraulic unit
Oil
Hydraulic hoses: Oil-polluted
material
Oil tank: >PP<
Motor, valves: Electronic
components
Pump: Iron/steel
Accumulator: Iron/steel
Ensure that the system has been
depressurised.
Carefully drain all oil.
Any accumulators should be
emptied of gas and if possible
opened.
Travel motors
Motor: Electronic components
Wires
Parking brake: Hazardous waste
Drive gears
Iron/steel
Oil
Carefully drain all oil
Hazardous waste
Wheels
Tread: Plastic according to marking
Hub: Iron/steel
If the tread and hub cannot be
separated, then sort the wheel as
complex material
https://www.forkliftpdfmanuals.com/
To Next Page
