© Cesab 5 – 10 T Code(s): 841, 842, 843
Repair manual: Parameters Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
Parameter 107 – Battery size
# 107 - Battery size
Specifies what type of battery the truck is equipped with.
The parameter can be used to compensate for different ways of driving by:
• increasing the value to discharge the battery even more.
• reducing the value if the battery is discharged too much.
In order to set the meter for battery charge level, consideration must be given
to the following:
• Acid density when the battery is fully charged; to check the quality of the
battery. This value should be between 1.27 and 1.29.
Please note that the acid density may vary between different kinds of
battery.
• When the lifting capacity is disabled (battery 80% discharged), the value
must be close to (but not below) 1.14.
Par. Description Min.
Defa
ult
Max.
Incre
ment
Unit
107 Battery size 1 9 20 1
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
