Battery change for ILS-I internal door handle set
1. Loosen the screw of the outside shield.
2. Remove the outside shield. Note that the outside shield must be
removed upwards over the reader unit.
3. Replace the batteries.
Use only Energizer Ultimate Lithium 1.5V AA batteries.
The correct polarity is indicated in the battery compartment
and must be observed.
Wide shield replacement handle set ILS-I Page 43 of 83
7.5 Battery replacement
Overview: Use of master media Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration Assembly Basic information
To Next Page
Loading...
